Traction Bar Kit 4in. rear block axle
Improve traction on your 2003-2013 Ram 2500 or 2003-2018 Ram 3500 4WD (with 4 inch diameter axle tube) with a BDS Fixed length tubular traction bars. Fabricated from 1.25-inch OD x 1/8-inch wall steel tubing with durometer specific polyurethane bushings on each end. BDS traction bars reduce rear pinion angle change commonly referred to as axle wrap during acceleration with these BDS heavy-duty traction bars. Tubular design for good looks as well as serious axle control.
- Reduce Rear Axle Wrap
- Tubular Design for Opimal Strength and Appearance
- Bars are Contructed from 1.25 OD x 1/8 Wall Steel Tubing
- Application Specific Mounting Brackets Made from 3/16 Steel Plate
- Durometer Specific Polyurethane Bushings
Information:
Compatible with 0-8" lift kits however if installed on less than 4" of lift the bars will mount facing downward to allow sufficient clearance to the frame during suspension compression.
Application Summary:
| Year |
Make/Model |
| 2003-2010 |
Dodge Ram 2500 |
| 2003-2010 |
Dodge Ram 3500 |
| 2011-2013 |
Ram 2500 |
| 2011-2013 |
Ram 3500 |
| 2015-2018 |
Ram 3500 |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| GTIN |
00658848619719 |
| Hazardous Material Code |
N |
| Installation Time |
3-4 Hrs |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
B |
| Pvg Product Status |
Active |
| SDR Required Flag |
N |
