2004-2017 Ford F150 Reoil Traction Bar Mounting Kit
Fabricated from 2-inch OD x 3/16-inch wall steel tubing with a threaded bung welded in toward the axle and a CNC-machined end at the frame. Axle mount uses BDS's ultra-durable large-forged flex end and jam nut. Using a forged housing with large 1-1/4-nch x 12 threaded shank a single sided snap ring and 1-piece flex ball the flex ends are capable of up to 15 degrees of misalignment in either direction. At the frame end the bar uses a durometer specific polyurethane bushing and free floats in the traction bar utilizing a pair of dual stage internal compression springs and UHMW polyurethane bearings.
- Adjustable axle wrap control using dual-stage resistance springs
- Full floating traction bar design will not bind throughout the full range of wheel travel and/or hinder suspension articulation
- Spring preload can be adjusted on the vehicle without disassembling the traction bar
- Traction bar ends are greaseable and rebuildable
- Mounting brackets are bolt-on only requiring minor drilling for frame mount installation
Information:
Will work with Ford Raptor.
Application Summary:
| Year |
Make/Model |
| 2004-2020 |
Ford F-150 |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| GTIN |
00711745604308 |
| Hazardous Material Code |
N |
| Installation Time |
3-4 Hrs |
| Life Cycle Status Code |
Available Only While Supplies Last |
| Lift Height |
0_6 |
| Material |
Steel |
| NAFTA Preference Criterion Code |
B |
| Pvg Product Status |
Active |
| SDR Required Flag |
N |
