ICON VS 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. They feature remote reservoirs and are 100% rebuildable/revalveable.
ICON’s 2.5 Aluminum Series shocks are designed and built to give your vehicle outstanding performance off-road and a smooth ride on the street. With a truly vehicle-specific design, these shocks are configured specifically for each application in both length and damping tune. Featuring one-piece impact extruded aluminum cylinders, these 2.5 Aluminum Series shocks offer lighter weight, improved corrosion resistance, and a more uniform finish than traditional plated steel cylinders. Like all ICON shock absorbers, these 2.5 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For piggyback and specific remote reservoir applications, ICON’s unique use of a 6061 billet aluminum manifold a few inches below the top cap of the shock creates an internal “Bump Zone” that when used creates an additional 20% of damping force. This additional force helps prevent harsh bottom-out conditions and controls the suspension effectively when compressing at high velocity. If you are looking for a more user-defined tune, consider looking into the Compression Damping Control Valve (CDCV) shocks.
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- One-piece impact extruded aluminum cylinders offer excellent corrosion resistance and consistent finish
- Remote reservoir design improves heat dissipation to reduce shock fade during prolonged use
- Double-sealed Schrader caps reduce risk of damage
- 6061 aircraft grade aluminum CNC machined components
- ICON’s internal “Bump Zone” increases damping by 20% to provide more control as the shock approaches full compression
- 7/8” diameter induction hardened, chrome plated shock shaft
- PTFE lined spherical bearings and application specific mounting hardware
- All ICON 2.5 Series Piggyback and Remote Reservoir shocks can be upgraded to ICON’s Compression Damping Control Valve (CDCV)
- One piece digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 100% Revalveable
- Nitrogen charged monotube design with piggyback reservoir
- 100% Rebuildable
Information:
TECH NOTE: Can be installed as secondary shocks in OE location with ICON 4-5.5" lift coilover conversions
Application Summary:
| Year |
Make/Model |
| 2005-2022 |
Ford F-250 Super Duty |
| 2005-2022 |
Ford F-350 Super Duty |
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Adjustable |
NO |
| Boot Included |
NO |
| Bore Diameter |
2.25 |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Cylinder Color |
Silver, Silver |
| Cylinder Material |
Aluminum, Aluminum |
| Damping Type |
Oil, Oil |
| External Reservoir |
Yes, Yes |
| GTIN |
00840103405889 |
| Gas Charged |
Yes |
| Grade Type |
Performance, Performance |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Lower Mount Type |
EYELET |
| Mounting Hardware Included |
Yes |
| NAFTA Preference Criterion Code |
C |
| OEM Wheels & Tires Fitment |
Not compatible with all available OE wheel/tire combinations. Aftermarket wheels with lower offset/less backspace recommended., Not compatible with all available OE wheel/tire combinations. Aftermarket wheels with lower offset/less backspace recommended. |
| SDR Required Flag |
N |
| Service Parts |
252011 - 2.5 PIGGYBACK/REMOTE RESI/BYPASS REBUILD KIT, 257340 - 7/8 SHAFT 14.25 OAL, 10.00 TRAVEL |
| Shaft Diameter |
0.875, 0.875 |
| Shaft Material |
Chrome, Chrome |
| Shock Absorber Body End Measuring Point |
Shoulder of Stem |
| Shock Absorber Rod End Measuring Point |
Center of Eylet |
| Tube Outside Diameter |
2.5 |
| Upper Mount Type |
Stem |
| Warranty Time |
1 |
