Stage 8 includes 2.5 Series remote reservoir coilovers for 3-4.5” of front lift, greater performance, and 35” tire fitment. ICON UCAs and links correct alignment while rear coils with 2.5 Series remote res rear shocks balance the tuning.
Rounding out the Stage 8 suspension system are 2.5 Aluminum Series rear remote reservoir shocks specially tailored for the 2023 Toyota Sequoia. The 2.5 Aluminum Series shocks’ larger diameter offers outstanding performance off-road and a smooth ride on the street. Remote reservoirs ensure optimum performance by increasing the duration of consistent damping regardless of situation, keeping the shocks at a cooler operating temperature during heavy use. They also feature a unique internal Bump Zone that when used creates an additional 20% of damping force to help better control hard bottom outs. Their pairing with the ICON V.S. 2.5 Series front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Sequoia.
- Vehicle specific design for 2023 Toyota Sequoia
- 2.5 Aluminum Series rear remote reservoir shocks provide increased performance and balanced tune with coilovers
- All ICON shock absorbers are fully rebuildable and re-tunable
- 2.5 Series front coilovers with remote reservoirs for superior damping and vehicle control along with improved shock cooling
- Adjustable front ride heights from 3-4.5” of front lift over stock
- Tubular UCAs for added strength, durability, and alignment correction for better drivability
- UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation
- Included sway bar drop brackets reduce bind in OE sway bar links
- Allows for full wheel travel without overstressing OE components
- Dual rate rear coil springs improve performance and ride quality while providing 3" of rear lift
- Billet rear lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment
Information:
APPLICATION NOTE #149: FOR 4WD MODELS WITHOUT TRD OFF-ROAD PACKAGE ICON RECOMMENDS USING ICON DIFF DROP (PART# 55156) OR USING TOYOTA TRD AXLES (PART# 434200C020 DRIVER / 434100C020 PASS). FAILURE TO DO SO COULD RESULT IN FRONT AXLE DAMAGE. NOT REQUIRED FOR TRD PRO.
Application Summary:
| Year |
Make/Model |
| 2023-2024 |
Toyota Sequoia |
| Attributes |
| AAP_UDA_12 |
EA |
| AAP_UDA_22 |
1 |
| AAP_UDA_4 |
55 |
| Active or Passive Suspension |
Passive |
| Add-On Part |
198000 - 2 PIN COILOVER SPANNER WRENCH KIT, 55156 - 22-23 TUNDRA/23 SEQUOIA DIFF DROP KIT |
| Adjustable Compression |
No |
| Adjustable Control Arm |
Yes |
| Adjustable Damping |
No |
| Adjustable Rebound |
No |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Coil Quantity Front |
2 |
| Country of Origin (Primary) |
US |
| Front Reservoir Style |
Remote |
| Front Shock Body Diameter |
2.5 |
| Front Spring Rate Type |
Linear, Linear |
| GTIN |
00840103422022 |
| Harmonized Tariff Code (Schedule B) |
8708807000 |
| Hazardous Material Code |
N |
| Life Cycle Status Code |
Available to Order |
| Maximum Lift Front |
4.5, 4.5 |
| Maximum Lift Rear |
3, 2 |
| Minimum Lift Front |
3, 3 |
| NAFTA Preference Criterion Code |
C |
| OEM Wheels & Tires Fitment |
Yes, Yes |
| Rear Reservoir Style |
Remote |
| Rear Shock Body Diameter |
2.5 |
| Rear Spring Rate Type |
Progressive Dual Rate, Progressive Dual Rate |
| Recommended Aftermarket Tires |
35" x 12.50" (Minor fender trimming and modifications may be required), 35" x 12.50" (Minor fender trimming and modifications may be required) |
| Recommended Aftermarket Wheels |
ICON Alloys |
| Reservoir Style |
Remote, Remote |
| SDR Required Flag |
N |
